Welcome: Flyron Technology Co., Ltd.
Language:
∷
∷
∷
Features
1. Built-in high-quality audio decoder chip.
2. Supports MP3 and WAV formats of sound files.
3. Built-in 4MB flash memory. It can store max. 4 mins long MP3 files of 128Kbps.
4. Update sound files easily on computer through USB connection.
-No need any software for help. It'll be detected as a USB flash drive on computer.
5. Equipped with 120mAH Li-ion rechargeable battery (LIR2450).
6. The Li-ion battery can be recharged using a phone charger or power bank (5V 1A) through the micro-USB port.
7. Two buttons available and each button activates an associated sound file.
8. Supports 4 trigger modes and the trigger mode for each button can be set individually.
9. Trigger modes and volume level can be set with a config file.
10. Equipped with 0.5W 8ohm speaker. Sound output is clear and good quality.
11. Low-power design.
12. PCB size: 40*25*6mm
Set a Trigger Mode
There are 4 trigger modes (from “0”to “3”) available for users to set in a config file according to the actual needs.
Each of the number from “0”to “3” represents a corresponding trigger mode, which can be set individually for each of the two buttons. See the details as below.
Num | Corresponding Trigger Mode | Explanation |
0 | Pulse interruptible (default mode) | When a button is pressed, it plays the associated sound file. It is possible to interrupt the playback by pressing the same button or the other button. Once playback is interrupted, it will automatically start the sound that is associated with the button pressed. |
1 | Hold and play in a loop | The sound file will only play while button is held/maintained during playback. Once the button being held is removed, the playback will be stopped/canceled. Once the button is kept holding, when the playback of the sound file is finished, it will start to play it repeatedly (loop playback). |
2 | Pulse non-interruptible | When a button is pressed, it plays the associated sound file. It is NOT possible to interrupt the playback by pressing the same button or the other button. The playback will only end when the sound file has played its entirety. |
3 | Hold and play once | The sound file will only play while button is held/maintained during playback. Once the button being held is removed, the playback will be stopped/canceled. Once the button is kept holding, when the playback of the sound file is finished, it will STOP. |
Note: When it is connected to computer for sound updating, the ON/OFF switch needs to be switched to ON first, otherwise computer can't recognize it.
Contact: Mr. Kevin Xu
Phone: +86-18665018673
Tel: +86-20-36776060
Email: info@flyrontech.com
Add: No. 344, Shangye Ave., Huadu District, Guangzhou City, Guangdong Province, China
Kevin Xu
